Switching The Sirius Channel Select Mode; Switching Between The Detailed Information Dis- Play And The Preset List Display; Storing And Recalling Broadcast Stations - Pioneer AVIC-D3 - Navigation System With DVD Player Operation Manual

(5) SIRIUS channel select mode indicator
Shows what channel select mode has been
selected. You can select a channel from all chan-
nels in ALL CH mode, and select a channel from
the selected category in CATEGORY mode.
➲ "Switching the SIRIUS channel select mode"
➞ Page 96
(6) Detailed information or preset list display
(7) Category icon
1
Touch "SIRIUS" in the AV Source screen
to select the SIRIUS tuner.
➲ "Selecting an AV source" ➞ Page 29
2
Touch "Band" to select a SIRIUS band.
Touch "Band" repeatedly until the desired SIR-
IUS band is displayed, SIRIUS1, SIRIUS2 or
SIRIUS3.
3
To perform tuning, touch
The channels move up or down. Channels that
cannot currently be selected are skipped, and
the next channel is selected. If you keep
touching or
or decrease channel number continuously.
You can also perform manual tuning by press-
ing the  or  button.
Switching the SIRIUS channel
select mode
You can switch modes between the two methods
for selecting and listing channels.
ALL CH Mode:
You can select a channel from all channels.
CATEGORY Mode:
You can select a channel within selected cate-
gory.
1
Touch "Mode" to select the desired chan-
nel select mode.
Touch "Mode" repeatedly to switch between
the two modes.
Switching between the detailed
information display and the pre-
set list display
You can switch the left side of the basic screen
according to your preference.
96
or .
, you can increase
1
Touch "Detail" (or "Preset").
Each touch of "Detail" (or "Preset") changes
the detail information display or preset list dis-
play.
Detail information display
(e.g. ALL CH mode)
Preset list display
(e.g. ALL CH mode)
SIRIUS channel information
Storing and recalling broadcast
stations
If you touch any of the preset tuning keys P1 —
P6 to easily store up to six broadcast stations for
later recall with the touch of a key.
1
Select the channel that you want to store
in memory.
2
Touch "Preset" to display the preset list.
3
Keep touching a preset tuning key P1 —
P6 until the SIRIUS preset number (e.g.,
P.CH 1) stops flashing.
The number you have touched will flash in the
SIRIUS preset number indicator and then
remain lit. The selected station has been
stored in memory.
The next time you touch the same preset tun-
ing key P1 — P6 the station is recalled from
memory.
❒ Up to 18 stations, 6 for each of three SIR-
IUS bands can be stored in memory.