Advanced - Linksys WGA54G User Manual

• Keys 1-4 - If you are not using a Passphrase, then you can enter one or more
WEP keys manually.
In each key field, manually enter a set of values. (Do not leave a key field
blank, and do not enter all zeroes. These are not valid key values.) If you are
using 64-bit WEP encryption, then each key must consist of exactly 10
hexadecimal characters in length. If you are using 128-bit WEP encryption,
then each key must consist of exactly 26 hexadecimal characters in length.
Valid hexadecimal characters are "0"-"9" and "A"-"F".
Click the Apply button to save your changes. If your page doesn't automati-
cally refresh itself, then click the Refresh button of your web browser. Click
the Cancel button to cancel your changes. Click the Help button for addition-
al on-screen information.

Advanced

Use the Advanced Settings screen to customize advanced wired and wireless
settings, clone a MAC address onto the Game Adapter, change the password,
and restore default settings.
IP Address
• Obtain IP Address automatically (DHCP) - If your network assigns IP
addresses via DHCP, select this setting.
Use the following IP settings - If your network uses static IP addresses,
•
select this setting and complete the following fields:
IP Address - The IP address must be unique to your network. We suggest
you use the default IP address of 192.168.1.245. This is a private IP
address, so there is no need to purchase a separate IP address from your
service provider. Verify the address and click the Apply button to save
changes.
Subnet Mask - The Game Adapter's Subnet Mask (or IP Mask) must be the
same as your Ethernet network. Verify this is correct and click the Apply
button to set it.
Gateway - If your network does not have a Gateway, then leave this field
blank.
24
Figure 7-4
Note: You may have to refresh this page to see any new settings.
Transmission Rate - The default setting is Automatic. The range is from
•
1 to 54Mbps.
The rate of data transmission should be set depending on the speed of your
wireless network. You can select from a range of transmission speeds, or
you can keep the default setting, Automatic, to have the Game Adapter
automatically use the fastest possible data rate and negotiate the best possi-
ble connection speed between the Game Adapter and another wireless-
equipped device.
25