Advertisement
3. From the services listed in the right pane of the Computer
Management window, right-click Wireless Zero Configuration,
and then choose Properties from the shortcut menu.
4. In the Wireless Zero Configuration Properties (Local
Computer) dialog box, check whether Service status is Started. If
not, click Start.
5. Click OK to close the dialog box, and then close the Computer
Management window.
Step 3 Configure the wireless network connection on your computer, do as
follows (taking the Windows XP operating system as an example):
1. Choose
Communications > Network Connections.
2. In the Network Connections window, right-click Wireless
Network Connection to display a shortcut menu, and then select
View Available Wireless Networks from the shortcut menu.
3. Select the wireless network that is configured in Step 1, and then
click Connect in the lower right corner of the window.
4. In the displayed dialog box, enter the access password that is
preset in Step 1, and then click Connect.
After the password is verified, Connected appears on the icon of the
wireless network in the wireless network list, which indicates that the
computer is connected to the HG532c through a wireless connection.
Start
>
Copyright © Huawei Technologies Co., Ltd. 2010. All
rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE
ONLY, AND DOES NOT CONSTITUTE ANY KIND OF
WARRANTIES.
All
Programs
4
>
Accessories
Issue: 01 (2010-07-26)
Part Number: 201216
>
Advertisement
