Audio Dubbing - Canon 2486B001 Instruction Manual

Audio Dubbing

You can add sound to a recording using
the built-in or an external microphone.
(
POINTS TO CHECK
You can only dub audio on tapes recorded
in SP mode with [
( 41)
. This function is operated with the
wireless controller.
STOP
PAUSE
AUDIO DUB.
1
Locate the point where you want
to start dubbing audio.
Before locating the starting point,
you can also set the zero set
memory ( 35) at the point where
you want the audio dubbing to end.
The camcorder will automatically
stop audio dubbing at that point.
2
Start playback and immediately
PAUSE
press
3
Press AUDIO DUB.
"AUDIO DUB." and
4
PAUSE
Press
Speak into the microphone.
21)
12bit] audio
REW FF
PLAY
STOP
PAUSE
SLOW
ZERO SET
AUDIO DUB. TV SCREEN
MEMORY
.
.
appear.
to begin dubbing.
5
STOP
Press to stop dubbing.
IMPORTANT
• Audio dubbing will stop if the tape has a
blank section or a section recorded in
LP mode or [
• The quality of the dubbed sound will not
be as good when dubbing audio to a
tape that was not recorded with this
camcorder or after having dubbed audio
over the same scene more than 3 times.
NOTES
You can connect the camcorder to a TV to
check the picture on the TV screen and
check the sound through headphones
connected to the TV.
T
O SELECT THE AUDIO TRACK FOR PLAYBACK
You can select the audio track that will
be played when playing back a tape
that was audio dubbed (
16bit] audio.
42).
53