What Scan Settings Are Used; Changing Settings After A Button Has Been Pressed - Canon CanoScan N1240U Manual

Chapter 3
Using the Scanner Buttons

What Scan Settings Are Used?

You may wish to know what settings are used when a scan
is initiated by simply pressing a scanner button. What
image type is selected? What are the Image quality and
Paper size settings?
The answer is the latest settings that have been specified.
For example, if you start the Toolbox you can click the
[Copy] button in the main window and set the Image type
to Grayscale, the Image quality to Standard, and the Paper
size to A5 Portrait in the settings dialog. When you press
the Copy button on the dialog, the scan will start and
transfer the image to the printer. The next time you press
the scanner's (Copy) button, the item will be scanned
and copied with the latest settings. Namely, the Image type
will be set to Grayscale, the Image quality to Standard, and
the Paper size to A5 Portrait.
f
Note
• If you want to adjust the scan settings without initiating
a scan, please perform the following procedure in
advance.
1. Start the Toolbox and click the desired button in its
main window.
2. Adjust the settings in the settings dialog.
3. Click the [Apply] button, then click the [Cancel]
button.
w w
Contents Index
41
Using the Scanner Buttons (3/3)

Changing Settings after a Button Has Been Pressed

If you decide to change the scan settings after a scanner
button has been pressed, click the [Cancel] button on the
Scanning progress dialog before the scan finishes.
Clicking the [Cancel] button will terminate the scan and
display the settings dialog. You can then adjust the
settings and restart the scan.
Previous View Next View Previous Page Next Page