PDG-DSU30 Expand Serial Command Functional Specifications 1ÿ Overview 0û This Functional Specification defines communication with PDG- DSU30. 0û Commands are designed to Network communication, but most commands are also available to remote-control a projector through RS-232C from a computer. Therefore, commands are defined as Expand Serial Commands.
PDG-DSU30 Expand Serial Command Functional Specifications 3ÿ Notes for communication Expand Serial Command is defined as a single command per line that starts with “C” and ends with carriage return (0x0D). When a projector receives carriage return (0x0D), it starts decoding. There are two types of commands;...
PDG-DSU30 Expand Serial Command Functional Specifications 3.5.1 Normally it is less than 1000ms for the completion of receiving a command and returning the response, but it takes more than 1000ms for some Functional Execution Commands (CF commands) as listed below: Command Item CF_IMAGE...
PDG-DSU30 Expand Serial Command Functional Specifications Functional Execution Command Table 5.1. Image Command Table Execute command Item CF_IMAGE_%1[CR] Set Image mode Preset CF_BRIGHT_%1[CR] Set value of Brightness CF_CONT_%1[CR] Set value of Contrast CF_SHARP_%1[CR] Set value of Sharpness CF_COLOR_%1[CR] Set value of Color CF_TINT_%1[CR] Set value of Tint CF_GAMMA_%1[CR]...
PDG-DSU30 Expand Serial Command Functional Specifications 5.7. Setting Command Table Execute command Item CF_LANG_%1[CR] Select language for OSD CF_MENUPOSITION_%1[CR] Change the Menu position CF_INPUTSEARCH_%1[CR] Set ON/OFF of Input search CF_BACKGND_%1[CR] Set Screen display in case of no signal CF_LOGO_%1[CR] Set Logo function CF_HIGHLAND_%1[CR] Set High Altitude function CF_ON-STA_%1[CR]...
PDG-DSU30 Expand Serial Command Functional Specifications Status Read Command Table Image Status Read Command Table Status read command Item CR_IMAGE [CR] Get Selected Image Status CR_BRIGHT [CR] Get value of Brightness CR_CONT [CR] Get value of Contrast CR_SHARP [CR] Get value of Sharpness CR_COLOR [CR] Get value of Color CR_TINT [CR]...
PDG-DSU30 Expand Serial Command Functional Specifications Setting Status Read Command Table Status read command Item CR_LANG [CR] Get selected language CR_MENUPOSITION[CR] Get setting status of Menu position CR_INPUTSEARCH [CR] Get setting status of Input search. CR_BACKGND[CR] Get setting status of Screen mode in case of no signal CR_LOGO[CR] Get setting status of Logo CR_HIGHLAND[CR]...
PDG-DSU30 Expand Serial Command Functional Specifications Error Code Table Error Code Contents -When the received data which cannot be decoded. -Parameter designation error (wrong digit number, including invalid value, etc.) Normal reception. (This is “Not” error.) Specified function is not available in the selected mode. Specified value is out of range.
PDG-DSU30 Expand Serial Command Functional Specifications Functional Execution Command 8.1 Format 1)PC issues a command in the format below: Pattern1: “CF_Command” [CR] Pattern2: “CF_Command_” %1 [CR] CF_: Header Command: Text %1: Parameter (Text) Space (To separate Command and Parameter) 2)The projector decodes the received command and when it gets ready to receive another command, it returns the Correspondence.
PDG-DSU30 Expand Serial Command Functional Specifications 8.4.5 CF_COLOR Command Command “CF_COLOR_%1” [CR] “000~100”------------- Directly specify setting value of Color “UP”--------------------- Increment setting value of Color by 1 “DN”--------------------- Decrement setting value of Color by 1 Set value of Color. (Available only in the normal Power ON status) Details No indication display is shown when receiving the command.
PDG-DSU30 Expand Serial Command Functional Specifications 8.4.9 CF_COLTEMP Command Command “CF_COLTEMP_%1” [CR] “HIGH” ------------------------------Select High “MEDIUM” ------------------------- Select Medium “LOW” ------------------------------ Select Low Set Color Temperature Details (Available only in the normal Power ON status) No display is shown when projector received command. Acceptable “000”...
PDG-DSU30 Expand Serial Command Functional Specifications PC Control Command 8.5.1 CF_FSYNC Command Command “CF_FSYNC_%1” [CR] “0000~0031” ----------------- Directly specify setting value of Fine sync “UP” --------------------------- Increment setting value of Fine sync by 1 “DN” --------------------------- Decrement setting value of Fine sync by 1 Set value of Fine sync in PC signal Details (Available only in the normal Power ON status)
PDG-DSU30 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command “CF_INPUT_%1” [CR] “COMPUTER” ------------------- Select Computer “S-VIDEO” ------------------------ Select S-video “VIDEO” --------------------------- Select Video Select Input (Valid only in the normal Power ON status.) Details This command works the same as “Computer”/”VIDEO”/”S-VIDEO” button of the remote control.
PDG-DSU30 Expand Serial Command Functional Specifications 8.7.5 CF_MOUNTING Command Command “CF_MOUNTING_%1” [CR] “FDESKTOP” ------------------ Select Front-Desktop “RDESKTOP” ------------------ Select Rear-Desktop “FCEILING” --------------------- Select Front-Ceiling “RCEILING” -------------------- Select Rear-Ceiling Select Mounting mode. (Valid only when in the normal Power ON status.) Details No indiction is displayed on the screen by receiving this command.
PDG-DSU30 Expand Serial Command Functional Specifications Lamp Command 8.8.1 CF_LAMPH Command Command “CF_LAMPH_%1”[CR] “RST”-----------------Reset Lamp counter. Reset total lamp running time Details This command is available in normal Power ON status. Acceptable “000” [CR] Correspondence Unacceptable “Error Code” [CR] 8.8.2 CF_LAMPMODE Command Command “CF_LAMPMODE_%1”...
PDG-DSU30 Expand Serial Command Functional Specifications 8.9 Sound Command 8.9.1 CF_VOLUME Command Command “CF_VOLUME_%1” [CR] “000~010” “UP” --------------------------- Turn UP the volume by 1step “DN” --------------------------- Turn DOWN the volume by 1step Set value of Volume. (Valid only in the normal Power ON status.) The command behaves the same as remote control, which adjusts volume directly and release the sound-mute function.
PDG-DSU30 Expand Serial Command Functional Specifications 8.10.4 CF_BACKGND Command Command “CF_BACKGND_%1” [CR] “BLUE” -------------------- Select Blue Back “BLACK” ------------------ Select Black Back “RED” ---------------------- Select Red Back “GREEN” ------------------ Select Green Back “WHITE” ------------------- Select White Back Set Background.(Available only in the normal Power ON status) The status set by this command is stored in EEPROM and the setting remains Details even after the power is ALL OFF.
PDG-DSU30 Expand Serial Command Functional Specifications 8.10.8 CF_P-MANETIME Command Command “CF_P-MANETIME_%1” [CR] “000~180” ----------- Directly specify the timer to operate Power management “UP” ------------------- Increase the timer for Power management “DN” ------------------- Decrease the timer for Power management Set up Power Management. (Valid only in the normal Power ON status.) The value set by this command is stored in EEPROM and its setting is Details effective even after ALL is OFF.
PDG-DSU30 Expand Serial Command Functional Specifications 8.10.12 CF_INFODISP Command Command “CF_INFODISP_%1”[CR] “ON” --------------------- Set Information hide On “OFF” ------------------- Set Information hide Off Set up Information hide. (Valid only in the normal Power ON status.) The value set by this command is stored in EEPROM and its setting is effective Details even after ALL is OFF.
PDG-DSU30 Expand Serial Command Functional Specifications 8.11 Other Command 8.11.1 CF_KEYENU Command Command “CF_KEYENU_%1”[CR] “RIGHT” ------------------------- Shift Pointer on OSD Menu to right “LEFT” --------------------------- Shift Pointer on OSD Menu to left “UP” ------------------------------ Shift Pointer on OSD Menu to right “DN”...
PDG-DSU30 Expand Serial Command Functional Specifications Status Read Command 9.1 Format PC issues a command in the format below: “CR_Command” [CR] Command: String When the projector receives the applicable command, it returns the required information as a data string. “000_” %1 [CR] %1: required Information (a data string.
PDG-DSU30 Expand Serial Command Functional Specifications 9.4.6 CR_TINT Command Command “CR_TINT” [CR] Details Get user controlled value of Tint. Acceptable “000_%1” [CR] “000” – “100” Correspondence “Error Code” [CR] ------ When command is invalid in the Unacceptable given condition. “?” [CR] ----------------- When unknown command is received 9.4.7 CR_GAMMA Command Command...
PDG-DSU30 Expand Serial Command Functional Specifications 9.4.10 CR_COLSET-%1 Command Command “CR_COLSET-%1” [CR] Details Get value of Color setting. Acceptable “000_%2” [CR] Select which Color setting to get the value “RGAIN”------------------------ Select Red Gain “GGAIN”------------------------ Select Green Gain “BGAIN”------------------------ Select Blue Gain “RBIAS”------------------------ Select Red Bias “GBIAS”------------------------ Select Green Bias “BBIAS”------------------------ Select Blue Bias...
PDG-DSU30 Expand Serial Command Functional Specifications 9.5 PC Status Read Commands 9.5.1 CR_FSYNC Command Command “CR_FSYNC” [CR] Details Get value of Fine Sync Acceptable “000_%1” [CR] Correspondence "0000-0031" “Error Code” [CR] -------When command is invalid in the Unacceptable given condition “?”...
PDG-DSU30 Expand Serial Command Functional Specifications 9.10 Setting Status Read Commands 9.10.1 CR_LANG Command Command “CR_LANG” [CR] Details Get selected language Acceptable “000_%1” [CR] “ENG” -------------------------- English is selected “DEU” -------------------------- German is selected “FRA” -------------------------- French is selected “ITA” ---------------------------- Italian is selected “ESP”...
PDG-DSU30 Expand Serial Command Functional Specifications 9.10.4 CR_BACKGND Command Command “CR_BACKGND” [CR] Details Get setting status of Screen for no signal Acceptable “000_%a” [CR] “BLUE” -------------------- Blue Back is selected “BLACK” ------------------ Black Back is selected Response “RED” --------------------- Red Back is selected “GREEN”...
PDG-DSU30 Expand Serial Command Functional Specifications 9.11 Other Status Read Commands 9.11.1 CR_STATUS Command Command “CR_STATUS” [CR] Get status of Projector. Details This command is the same as “CR0” of Basic command, but it returns error code. Acceptable “000_%1” [CR] “00”...