Connecting The Print Server - Epson C823781 - Net Print Server Software Installation Manual

Connecting the Print Server

Follow the steps below to connect the print server to the network.
1. Make sure the printer is turned off.
2. Plug the print server into the printer's parallel interface
connector and secure it with the wire clips.
3. Connect the network cable to the print server, and connect the
other end to the network.
Note:
❏ Use a Category 5 twisted-pair cable to connect the print server
to the network.
❏ The print server will automatically use DHCP to obtain an IP
address. If it cannot get an IP address this way, it will use the
private IP address of 192.168.192.168.
Software Installation Guide
9