Static Ipv6 (Stateful) - D-Link DIR-632 User Manual

Section 3 - Configuration
My IPv6 Connection:
Select Static.IPv6 from the drop-down menu.
WAN IPv6 Address
Enter the address settings supplied by your Internet
Settings:
provider (ISP).
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address:
Displays the Router's LAN Link-Local Address.
Enable Autoconfiguration: Check to enable the Autoconfiguration feature.
Autoconfiguration Type: Select Stateful.(DHCPv6) or Stateless. Refer to the next
page for Stateless.
IPv6 Address Range Start:
Enter the start IPv6 Address for the DHCPv6 range for
your local computers.
IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for
your local computers.
IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes).
D-Link DIR-632 User Manual

Static IPv6 (Stateful)

47