D-Link DHP-307AV User Manual page 14

Section 3 - Configuration
Adding.a.Device.to.your.Powerline.network
If you use the default encryption key within existing Powerline network and the new device retains the default encryption key, you can just plug
the new device into a power outlet. Then all devices can communicate with each other.
If the encryption key within existing Powerline network has been customized, you have two ways to add the new device
to your Powerline network.
1. You can use Powerline AV Utility to apply the customized encryption key in your record to the new device. Then all devices can communicate
with each other by using the customized encryption key.
2. You can use Powerline AV Utility to set all devices within existing Powerline network and the new device back to the default encryption key
first. Then follow the 1 to 3 steps of "Setting your private Encryption Key". Your Powerline network will securely be configured with a customized
encryption key and all devices can communicate with each other after your setting.
D-Link DHP-307AV User Manual 14