Clp-S408 Assembly - Yamaha Clavinova CLP-430 Owner's Manual

CLP-S408 Assembly

Remove all parts from the package and make sure you have all of the items.
Connector
panel
Foamed styrol pads
Remove foamed styrol pads from the package, position them on
the floor, then place A on top of them.
Position the pads so that they will not hide the connector panel
on the bottom of A.
NOTICE
Please keep the protective sheet for later use. It will be used to
protect the keyboard from being scratched when the instrument
is transported. The protective sheet should be spread over the
entire keyboard before closing the key cover.
Pedal cord
The pedals are covered with vinyl covers when shipped from
the factory. Remove the cover from the damper pedal for
optimum use of the GP Responsive Damper Pedal effect.
Appendix
76
Assembling the Clavinova
A
Protective sheet
B
C
D
E
Assembly parts
6 x 20 mm long screws x 10
6 x 16 mm short screws x 6
4 x 14 mm thin screws x 5
4 x 20 mm tapping screws x 5
Cord holders x 2
Headphone hanger
4 x 10 mm thin screws x 2
Headphone hanger
Power cord
F