Setting The Default Mode; Setting The Toner Save Mode - Dell 2335dn - Multifunction Monochrome Laser Printer B/W User Manual

faxing after changing the settings on the operator panel.
1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or
4. Press Scroll ( or
The available time options are 15, 30, 60 and 180
(seconds).
You can select from 15, 30, 60 and 180 (seconds).
Selecting Off means that the printer does not restore the
default settings until you press Start (
copying or faxing, or Cancel (
5. Press Select (
6. Press Cancel (

Setting the Default Mode

Your machine is preset to Fax mode. You can switch this
default mode to Copy mode or Scan mode.
1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or
4. Press Scroll ( or
5. Press Select (
6. Press Cancel (

Setting the Toner Save Mode

Toner Save mode allows your machine to use less toner on
each page. Activating this mode extends the life of the toner
) to highlight Setup and then press Select (
) to highlight Machine Setup and then press Select (
) to highlight Timeout and then press Select (
) to display the timeout value you want.
) to save the selection.
) to return to the Standby mode.
) to highlight Setup and then press Select (
) to highlight Machine Setup and then press Select (
) to highlight Default Mode and then press Select (
) to display the mode you want.
) to save the selection.
) to return to the Standby mode.
).
).
).
) to begin
) to cancel.
).
).
).
Page 27 of 52