User-Vlan-Protocol-Id - Fujitsu XG700 - Switch User Manual

XG700 User's Guide

5.11.5 user-vlan-protocol-id

Function
The VLAN tag protocol ID (VPID or TPID) used for VLAN tag identification can be changed to the user-defined value of each
port.
The standard VLAN tag protocol ID has been defined to 0x8100 in IEEE 802.1Q. However, you can use the standard tag of
IEEE 802.1Q as the multiple-tag VLAN which has been encapsulated with the user-defined VPID (or TPID) tag (*).
*: Similar functions are called as Stacked VLAN, Nested VLAN, VLAN tunneling and 802.1Q in 802.1Q.
Prompt
xg(config-if)#, or xg(config-agg)#
Command syntax
user-vlan-protocol-id <0x05DD ~ 0xFFFF>
no user-vlan-protocol-id
Parameter
user-vlan-protocol-id <0x05DD ~ 0xFFFF>
Specify the VPID (or TPID) using a hexadecimal integer beginning with 0x. It can be an integer of 0x05DD to 0xFFFF.
Command type
Configuration command
Default
0x8100
Example
Enter the interface edit mode for ports 1 to 3 and set the VPID (or TPID) to 0x2000.
xg(config)# interface port range 1 3
xg(config-if)# user-vlan-protocol-id 0x2000
For the frame format, see the TPID (Tag Protocol Identifier) in
For the multiple-tag VLAN setup example and the frame flow, see
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
"Tag VLAN Frame
148/266
Format".
"Multiple VLAN".