Setting The Digital Input (Digital In) Terminals -Digital In 1/2; Setting The Auto Function Mode-Auto Mode; Selecting The Component Video Input Mode -Dvd Video In/Video Videoin - JVC RX-D201S - AV Receiver Instructions Manual

Setting the digital input (DIGITAL IN)
terminals—DIGITAL IN 1/2
When you use the digital input terminals, register what
components are connected to which terminals—DIGITAL IN 1/2
(see page 10) so that the correct source name will appear when
you select the digital source.
Select one of the following components for each terminal:
DVR/DVD For the DVD player (or DVD recorder).
VIDEO For the component connected to the VIDEO IN jacks
on the rear of the receiver.
VCR For the VCR.
TV For the TV.
Initial setting: DVR/DVD (for "DIGITAL IN 1")
VIDEO (for "DIGITAL IN 2")
NOTES
• You cannot assign the same component for different terminals.
"DIGITAL IN 1" has the priority for assignment to "DIGITAL IN 2."
Ex.: When "DIGITAL IN 1" is set to "DVR/DVD", "DIGITAL IN 2"
is selectable for the other components.
• Setting "DIGITAL IN 1" affects "DIGITAL IN 2" settings. When
you have changed "DIGITAL IN 1," confirm the components
assigned to "DIGITAL IN 2."
Setting the Auto Function mode
—AUTO MODE
The source will be selected automatically simply by turning on a
video component.
• This function takes effect for the video components connected
to the receiver using the SCART cable—DVR/DVD and VCR.
Auto Function mode works as follows:
• When a video component is turned on, the receiver selects the
video component as the source (and the TV input is changed
automatically).
• When a video component currently selected as the source is
turned off, the receiver changes the source to the video source
previously selected—DVR/DVD, VCR, or VIDEO.
< >
MODE AUTO1 Auto Function mode works when the
receiver is on.
< >
MODE AUTO2 Auto Function mode works whether or not
the receiver is on. When the receiver is
off, turning on a video component turns
on the receiver, then the video component
is selected as the source.
< >
MODE MANUAL You need to select the source manually.
<
Initial setting: MODE MANUAL
< >
When "MODE AUTO1 " or "MODE
AUTO MODE indicator lights up on the display.
NOTE
When selecting VCR as the source, only turning on the VCR may
< >
not activate "MODE AUTO1
start playback to activate Auto Function mode.
20
>
< >
AUTO2 " is selected, the
." If this happens, you may need to
Selecting the component video input
mode—DVD VIDEO IN/VIDEO VIDEO
IN
When you use the component video inputs for connecting the
DVD recorder (or DVD player), VCR, or other video components
(STB, for example), register the type of video input jacks.
If you have not selected appropriate video input jacks, you cannot
view the playback picture on the TV.
For the DVD recorder or DVD player (DVD VIDEO IN):
< >
DVD RGB/C/S Select when connecting the DVD recorder
(or DVD player) to the SCART input, the
composite video or S-video input jacks.
< >
DVD CMPNT Select when connecting the DVD recorder
(or DVD player) to the component video
input jacks.
<
Initial setting: DVD RGB/C/S
For the component connected to the VIDEO IN jacks on the
rear of the receiver (VIDEO VIDEOIN):
< >
VIDEO S/C Select when connecting the video
component to the composite video or S-
video input jacks.
< >
VIDEO CMPNT Select when connecting the video
component to the component video input
jacks.
< >
Initial setting: VIDEO S/C
>