Cisco 2851 - Integrated Services Router User Manual page 73

Chassis Installation Procedures for Cisco 2800
Series Routers
This document describes how to install your Cisco 2800 series integrated services router on a desktop
or in a rack. It includes the following sections:
Installing Modules and Interface Cards, page 2
•
Installing Internal Field-Replaceable Units (FRUs), page 4
•
Setting Up the Chassis, page 5
•
Installing the Chassis Ground Connection, page 13
•
To see translations of the warnings that appear in this publication, see the
Note
3800 Series Integrated Services Routers Regulatory Compliance and Safety Information
accompanied this device.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2005 Cisco Systems, Inc. All rights reserved.
Cisco 2800 Series and Cisco
document that