Statement 100C-Attaching The Cisco Rps (Model Pwr675-Ac-Rps-N1 - Cisco 675E Hardware Installation Manual

Appendix C Translated Safety Warnings
Statement 100C—Attaching the Cisco RPS (model
PWR675-AC-RPS-N1)
Warning
Waarschuwing
Varoitus
Avertissement
Warnung
Avvertenza
Advarsel!
Aviso
¡Advertencia!
Varning!
78-15201-04
Statement 100C—Attaching the Cisco RPS (model PWR675-AC-RPS-N1)
Attach only the Cisco RPS (model PWR675-AC-RPS-N1) to the RPS receptacle.
Statement 100C
Slechts de Cisco RPS (model PWR675-AC-RPS-N1) aan de RPS contactdoos
verbinden.
Kiinnitä RPS-vastakappaleeseen vain Cisco RPS (malli PWR675-AC-RPS-N1).
Raccordez le bloc d'alimentation Cisco RPS (modèle PWR675-AC-RPS-N1)
uniquement au connecteur RPS.
An die RPS-Steckhülse darf nur das Cisco RPS (Modell PWR675-AC-RPS-N1)
angeschlossen werden.
Collegare soltanto il Cisco RPS (modello PWR675-AC-RPS-N1) alla presa RPS.
Koble bare Cisco RPS (modell PWR675-AC-RPS-N1) til RPS-stikkontakten.
Anexe o RPS Cisco (modelo PWR675-AC-RPS-N1) apenas ao receptáculo RPS.
Sólo conecte el Cisco RPS (modelo PWR675-AC-RPS-N1) al receptáculo RPS.
Koppla endast Ciscos RPS (modell PWR675-AC-RPS-N1) till RPS-uttaget.
Cisco RPS 675 Redundant Power System Hardware Installation Guide
C-9