SETTING EX/ES MODE
When surround back speakers are connected, you can listen to 6.1 or 7.1 multi-channel sound using the built-in Dolby Digital
Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source (such as a DVD player) is input, and
does not work with L.PCM and Dolby Digital 2 channel sources.
1.
Press the SETUP/MENU button.
•
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
2.
Press the ENTER button to select SETUP ENTER.
3.
Press the ▲▼ buttons to select EX/ES SETUP, and then press the
ENTER or ► button.
4.
Press the ▲▼ buttons to set the EX/ES mode you want.
•
AUTO : If the unit receives an audio signal that it can recognize, it will
select an optimal decoder for playback in 6.1/7.1 channels.
If the amplifi er does not recognize the audio signal, it will not play in
6.1/7.1 channel automatically.
•
ON : Dolby Digital or DTS signal will be played in 6.1 / 7.1 channel using
Dolby Digital Surround EX / DTS ES decoder.
•
OFF : Dolby Digital Surround EX / DTS ES decoder will not be used for playback.
- To exit setup mode-
•
Press the SETUP/MENU button.
SETUP OFF appears on the display and Setup Mode is exited.
M
You cannot use DTS-ES without surround back speakers connected.
HW-C700-C770S-C770BS-XAA_0609.in43 43
HW-C700-C770S-C770BS-XAA_0609.in43 43
43
2010-06-09
2010-06-09
5:07:38
5:07:38