Clear Virtual Disk Unreadable Sectors - Dell PowerVault MD3620f Command Line Interface Manual

Clear Virtual Disk Unreadable Sectors

This command clears the unreadable sector information from one or more
virtual disks.
Syntax
clear (allVirtualDisks | virtualDisk
[virtualDiskName] | virtualDisks [virtualDiskName1
... virtualDiskNameN]) unreadableSectors
Parameters
Parameter
allVirtualDisks
virtualDisk
virtualDisks
NOTE:
You can use any combination of alphanumeric characters, hyphens, and
underscores for the names. Command names can have a maximum of 30
characters. If you exceed the maximum character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome this limitation.
Description
Clears unreadable sector information from all of the
virtual disks in the storage array.
or The name of the specific virtual disk for which you
want to clear unreadable sector information. You can
enter more than one virtual disk name. Enclose the
virtual disk name in square brackets ([ ]). If the
virtual disk name has special characters, you also
must enclose the virtual disk name in double
quotation marks (" ").
Script Commands
153