Default Ipv4 Settings For The Management Ports On The Md3260/3260I/3660I/3660F Arrays; Default Ipv4 Settings For The Iscsi Ports On Md3260I And Md3660I Arrays - Dell PowerVault MD3060e Series Hardware And Software Manual

Default IPv4 settings for the Management Ports on the MD3260/3260i/3660i/3660f
arrays
NOTE: No default gateway is set.
By default, the management ports on the storage array are set to DHCP. If DHCP fails, the following IPv4 settings will be
used:
Controller/Port
Controller 0
Controller 1

Default IPv4 settings for the iSCSI Ports on MD3260i and MD3660i arrays

NOTE: No default gateway is set.
By default, the iSCSI ports on the storage array are set to the following static IPv4 settings:
Controller/Port (MD3660i)
Controller 0, Port 0
Controller 0, Port 1
Controller 1, Port 0
Controller 1, Port 1
Controller/Port (MD3260i)
Controller 0, Port 0
Controller 0, Port 1
Controller 0, Port 2
Controller 0, Port 3
Controller 1, Port 0
Controller 1, Port 1
Controller 1, Port 2
Controller 1, Port 3
IPv4 address
192.168.128.101
192.168.128.102
IPv4 address
192.168.130.101
192.168.131.101
192.168.130.102
192.168.131.102
IPv4 address
192.168.130.101
192.168.131.101
192.168.132.101
192.168.133.101
192.168.130.102
192.168.131.102
192.168.132.102
192.168.133.102
Subnet Mask
255.255.255.0
255.255.255.0
Subnet Mask
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
Subnet Mask
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
Port #
3260
3260
3260
3260
Port #
3260
3260
3260
3260
3260
3260
3260
3260
5