Table of Contents
Advertisement
Preparations and connections
(1)
(2)
DVD player, etc.
DIGITAL OUT
Tape deck, etc.
OUT
IN
E-6
ANTENNA
FM
GND
AM
75 UNBAL.
ANTENNA
FM
GND
AM
75 UNBAL.
DIGITAL IN
OPTICAL
ANTENNA
FM
GND
AM
75 UNBAL.
ANTENNA
FM
GND
AM
75 UNBAL.
DIGITAL IN
OPTICAL
SUBWOOFER
OUT
AUX
R
L
OUT
IN
R
L
FRONT
SPEAKERS
Antenna connection
(1) Supplied FM antenna
Connect the FM antenna wire to the corresponding terminal
and direct the FM antenna wire to the direction where the
strongest signal can be received.
(2) Supplied AM loop antenna
Connect the AM loop antenna wires to the corresponding
terminals. Position the AM loop antenna for optimum
reception.
Notes
● When static is still heard even after adjusting the position of
the AM loop antenna, try reversing the wire connections
(from the right terminal to the left one, and vice versa).
● The AM loop antenna should be placed apart from the main
unit. The antenna may be hung on a wall.
Using an external antenna
● Use an external FM antenna instead of an indoor FM
antenna if you need better reception. Consult your dealer.
● Use an external AM antenna if you need better reception.
Consult your dealer.
Connecting external components
This system can be connected with external audio
components.
● Connect an audio component to the AUX terminals on the
rear of the main unit by using RCA pin plug connector
cables correctly, that is to say L (left) to L and R (right) to R.
Also, refer to the owner's manual for the component to be
connected to this system.
If a tape deck is connected to the AUX (OUT) terminals, a
source played on this system or radio program can be
recorded with the tape deck.
● A digital-to-digital recording is possible from an external LD
(DVD) player, satellite tuner, DAT, etc. connected to the
8
MIN./
SEE OWNE
FOR CONN
DIGITAL IN (OPTICAL) terminal on the rear of the main unit
to the built-in MD recorder.
Advertisement
Table of Contents
