Rnet Sources - Russound SMS3 INSTALL Installation Manual

START UP
OPTIONS & STATUS CONFIGURATION
Note: If used with an RNET-enabled system, changes to the SMS3 stream names appear within the
graphical user interface only and DO NOT show up on the UNO keypads. UNO keypads display only
source names assigned through the RNET system. To eliminate confusion, it is recommended to
match the CAV/CAM source names with the media server's stream names.

RNET SOURCES

When the SMS3 is used in an RNET-enabled system, the three streams are associated with source
numbers within the RNET system. The SMS3's streams are pre-configured: Stream 1=Source 3,
Stream 2=Source 4, Stream 3=Source 5. These can be reassigned from this screen if necessary;
however, command type PERIPHERAL must be set for selected source numbers in the RNET system.
For a non-RNET system, or RNET systems that are not using all three streams, the "No RNET Source"
selection is available.
34