Honeywell HZ-817 - Energy Smart Heater Instructions Manual page 2

14. Use this heater only as described in this
manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or
injury to persons.
15. Avoid the use of an extension cord because the
extension cord may overheat and cause a risk
of fire. However, if you have to use an extension
cord, the cord shall be No. 14 AWG minimum
size and rated not less than 1875 watts. The
extension cord shall be a three wire cord with a
grounding-type cord and plug connector.
16. This heater draws 12.5 amps during operation.
To prevent overloading a circuit, do not plug
the heater into a circuit that already has other
appliances working.
17. It is normal for the plug to feel warm to the
touch; however, a loose fit between the
AC outlet (receptacle) and plug may cause
overheating and distortion of the plug. Contact
a qualified electrician to replace loose or worn
outlets.
18. Never tamper with this product or attempt to fix
it. Any tampering with, or modification of this
product can result in serious injury, death, fire
or risk of electric shock. Do not open, no user
serviceable parts inside.
IMPORTANT SAFETY INSTRUCTIONS REGARDING THE PLUG ON YOUR PRODUCT
Fig. 1
HZ-614, HZ-615, & HZ-617 SERIES OPERATION
• Place the heater on a firm, level surface away from any
combustible material.
• With Power Knob in the OFF position, plug the heater into a
grounded outlet.
• Turn the Thermostat Knob fully clockwise
• To turn the heater on, turn the Power Knob clockwise to the ON
position. (Fig. 2).
• If you want to use the Quick Heat
the Quick Heat Setting.
®
• When the room reaches a comfortable temperature, slowly turn the thermostat control counter-
clockwise until the heater goes off. This is the point at which the thermostat setting equals the
room temperature. If left at this setting, the thermostat will automatically turn the heater on and off to
maintain the selected temperature.
19. Do not remove product labels that contain
20. The output of this heater may vary and its
21. Caution - Before cleaning, or storage, or when
22. Caution - place the heater on a firm, level open
23. Caution - if your home has aluminum wiring
24 .
to the high setting.
feature, turn the Power Knob to
®
warnings or safety instruction.
temperature may become intense enough
to burn exposed skin. Use of this heater is
not recommended for persons with reduced
sensitivity to heat or an inability to react to avoid
burns.
not in use, turn the fan to the off position and
unplug the heater from the electrical outlet and
allow it to cool.
surface free from obstructions and at least
3 feet (0.9m) away from any combustaible
materials. DO NOT use on an unstable surface
such as bedding or deep carpeting. Be sure
the heater is not in a position where it may
be tripped over by small children or pets. The
heater's rubber feet will hold it firmly in position.
have a licensed electrician check your
receptacle's connections. When using any 1500
watt heater, aluminum wire connections can
cause a safety issue.
SAVE­THESE­INSTRUCTIONS
Fig. 2