Advertisement
show atm video-voice address
To display the network service access point (NSAP) address for the ATM interface, enter the show
atm video-voice address privileged EXEC command.
Syntax Description
There are no keywords or arguments.
Default
No default behavior or values
Command History
Release
12.0(5)XK and 12.0(7)T
Usage Guidelines
Enter this command to review ATM interface NSAP addresses that have been assigned using the atm
video aesa or atm voice aesa command and to insure that ATM management is confirmed for those
addresses.
Example
On a Cisco MC3810, the following example shows how to see information about ATM interface
NSAP addresses:
Table 1 describes the fields in the command output.
Table 1
Field
ilmi status
nsap address
type
Related Command
Command
show atm ilmi-status
show atm video-voice address
router# show atm video-voice address
nsap address
47.0091810000000002F26D4901.00107B4832E1.FE
47.0091810000000002F26D4901.00107B4832E1.C8
show atm video-voice address Fields
Modification
This command was introduced for the Cisco MC3810.
type
VOICE_AAL5
VIDEO_AAL1
Description
Indicates whether an ILMI PVC is set
up and operational to manage SVC
communications.
ATM interface NSAP address.
Interface ATM encapsulation type.
Description
Provides details about the status of ILMI management.
Voice over ATM Switched Virtual Circuits on the Cisco MC3810 29
show atm video-voice address
ilmi status
Confirmed
Confirmed
Advertisement
