Connection Using An Xdsl Modem; Connection Using A Usb Modem - Sony SNC-VL10N User Manual

Connection Using an xDSL Modem

1
Select xDSL (PPPoE) in the setup program or
select xDSL on Select Network Interface on the
Network Setting page for the Administrator, and set
the items for the xDSL modem connection.
For details on the settings, see "xDSL Interface" on
page 18.
For the use of the setup program, see "Assigning the
IP Address Using the Setup Program" in the
supplied Installation Manual.
2
Connect the camera to the network as follows:
AC power adaptor
(supplied)
Power cord
(supplied)
to an AC outlet
xDSL Modem
Network
Notes
• For details on the xDSL modem connection, refer to
the operation manual of the modem.
• For required connection settings, check with your ISP.
30
Connecting the Camera to a Network
SNC-VL10N/VL10P
DC IN
10BASE-T
12 V
Ethernet cable
(not supplied)
10BASE-T

Connection Using a USB Modem

1
Select PSTN in the setup program or select PSTN
on Select Network Interface on the Network Setting
page for the Administrator, and set the items for the
USB modem connection.
For details on the settings, see "PSTN Interface" on
page 18.
For the use of the setup program, see "Assigning the
IP Address Using the Setup Program" in the
supplied Installation Manual.
2
Connect the camera to the network as follows:
AC power adaptor
(supplied)
Power cord
(supplied)
to an AC outlet
USB Modem
Network
Notes
• For details on the USB modem connection, refer to the
operation manual of the modem.
• For required connection settings, check with your ISP.
SNC-VL10N/VL10P
DC IN
12 V
USB
MODEM
USB cable
(not supplied)
USB