Bosch DB18C3100R2 Installation Manual page 93

DiBos/DiBos Micro
Configuring the e-mail server setup
Alarm processing menu > Configure E-mail... button
or
Error forwarding menu > E-mail server button
E-mails can be sent regardless of whether or not you log on to the SMTP server.
1
2
3
4
5
6
7
NOTICE!
–
–
Bosch Sicherheitssysteme GmbH
Transmitter name:
E-mail address:
SMTP server:
With log-on to SMTP
server
User name:
Password:
Save
For information on how to add an e-mail recipient for alarm processing, see
Section 6.6 Configuring Alarm Processing
For information on how to add an e-mail recipient for error forwarding, see
Section Adding a recipient/editing recipient data, page 110
Installation Guide
Enter the name of the sender. The name appears as the
sender name for the e-mail recipient.
Enter the e-mail address of the sender.
Enter the name or the IP address of the SMTP servers (e-mail
server).
E-mails can only be sent when the sender is authorized to do
so. The SMTP server checks the sender's authorization in this
case.
Enter the user name for logging on to the SMTP server.
Enter the password for logging on to the SMTP server.
Password transmission is encrypted.
The entries are saved.
Default Configuration | en
F.01U.033.308 | V7 | 2009.09
93