NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router Configuration page 3

Creation of the VPN Policy on the ProSafe Router:
Now you will have the following fields available:
From the Router's GUI, go to the
•
VPN section and then select the
VPN wizard.
There, select the option for VPN
•
Client.
Connection Name: The name can
•
be any alphanumeric string. It
identifies your tunnel, but it bears no
relevance to the connection.
Pre-Shared Key: The name can be
➊ ➊ ➊ ➊
any alphanumeric string from 8 to
49 characters long.
Remote Identifier Information:
➋ ➋ ➋ ➋
The name can be any alphanumeric
string. It is a name that identifies the
remote peer in the VPN Connection
(Client). You can leave the default
➊ ➊ ➊ ➊
or create your own identifier.
Local Identifier Information: The
➋ ➋ ➋ ➋
➌ ➌ ➌ ➌
➌ ➌ ➌ ➌
name can be any alphanumeric
string. It is a name that identifies the
local peer in the VPN Connection
(Router). You can leave the default
or create your own identifier.
WAN Interface: If your router has
•
more than one WAN Interface, you'll
be prompted to select which interface
to use for the VPN Tunnel.
.
Version 1.1