Profiles - Linksys WPC600N - Ultra RangePlus Wireless-N PC Card User Manual

Chapter 3
Site Information
For each network selected, the following settings are
listed:
Wireless Mode This is the mode of the wireless network
currently in use.
Network Type This is the network type used by your
wireless network.
Radio Band
This is the radio band used by your wireless
network.
Security This is the status of the wireless security
feature.
MAC Address This is the MAC address of the wireless
network's access point.
Refresh Click Refresh to perform a new search for
wireless devices.
Connect To connect to one of the networks on the list,
select the wireless network, and click Connect. If the
network's wireless security is enabled, then one of these
wireless security screen appears:
WEP
If the network has the wireless security WEP encryption
enabled, then you see the WEP Key Needed for Connection
screen. Select the appropriate level of WEP encryption,
64-bit or 128-bit. Then enter the network's Passphrase
or WEP Key. Click Connect. To cancel the connection, click
Cancel.
WEP Security
WPA
If the network has the wireless security WPA Personal
security enabled, then you see the WPA Personal Needed
for Connection screen. Select the appropriate encryption
type, TKIP or AES. Enter the network's Pre-shared Key in
the Pre-shared Key field. Then click Connect. To cancel the
connection, click Cancel.
Dual Band Wireless-N Notebook Adapter
WPA-Personal Security
WPA2
If the network has WPA2 Personal wireless security
enabled, then you will see the WPA2 Personal Needed for
Connection screen. Enter the network's Pre-shared Key in
the Pre-shared Key field. To connect to the network, click
Connect. To cancel the connection, click Cancel.
WPA2-Personal Security

Profiles

The Profiles screen lets you save different configuration
profiles for different network setups. The table on the left
displays a list of available profiles with their profile names
and wireless network names.
Profiles
Configuration
5