Table of Contents
Advertisement
Valve FX Owner's Manual
STORING / NAMING PROGRAMS
• Use the <UP> and <DOWN> Cursor keys to select the
Algorithm you want to use with the Program. The LED display
now shows the Algorithm number as you scroll up or down.
• Use the <RIGHT> and <LEFT> Cursor keys to begin modifying
the Parameters of the currently selected Algorithm to suit your
purpose.
NOTE: When you change the currently selected Algorithm,
the default Parameters selected for the new Algorithm are
taken from the first Program in memory that uses it.
Once you have selected the Algorithm you want to use and modified
its Parameters, an asterisk appears in the upper right corner of the
title screen. This asterisk indicates that the Program has been modi-
fied and any changes you have made will be lost if not stored in the
Valve FX's memory.
In order for modified Programs to be available for later recall, you
must store them in memory. This is accomplished using the
<STORE> key. The Valve FX also allows you to give your Programs
custom names up to 15 characters in length. The naming procedure
uses the <UP> and <DOWN> Cursor keys, the Function keys, and/or
the data wheel to make Program naming extremely quick and easy.
The <MOD ¡> key changes the character from upper to lower case
and back. The <MIX ™> key places a space into the Program name,
and the <MORE £> key instantly jumps you to the numbers section of
the character set. The complete procedure for storing and naming a
Program is as follows:
• After you have made all the necessary modifications to the
Algorithm, press the <STORE> button once. The Valve FX is
now in Name mode. The display shows:
[PROGRAM NAME]
¡CAPS ™SPC £NUM
The blocked numbers preceding each option on the bottom line
indicate the Function key that will perform the function shown.
• Using the <UP>/<DOWN> Cursor keys or the Data wheel, scroll
to the character you want to use, or press one of the Function
keys. When you have selected the character you want, press
the <RIGHT> Cursor key. Note that the cursor moves to the
next character. Repeat this procedure until the Program name
is satisfactory.
Unique to the Valve FX naming process are several special naming
17
Section 3 - Programming
Advertisement
Table of Contents
