Receive Parameter Value; Return To Program Screen - 60; (H); Request Error/Status Flag - 62 - DigiTech SDISC SYSEX1.25 Manual

Procedures
Procedures
RECEIVE PARAMETER VALUE (63h)
SYS_HEAD, 63
vv 1 0000000v
vv 2 0vvvvvvv
The Receive Parameter Value procedure allows a new parameter value to be placed at
the current parameter selected. This procedure is similar to changing a parameter using
a continuous controller link in that the STORE LED status does not change.
RETURN TO PROGRAM SCREEN (60h)
SYS_HEAD, 60
When a Return To Program Screen procedure is received, the DigiTech device will
return to the program title screen if it is on an algorithm or parameter screen.
REQUEST ERROR/STATUS FLAG (62h)
SYS_HEAD, 62
When a Request Error/Status Flag procedure is received, the DigiTech device will
respond with a Receive Error/Status Flag procedure.
16
16
, vv , vv , F7
1 2

(h)

(h)
where v is bit 7 of the new value to be placed
(b)
where v is bits 6 through 0 of the new value to be placed
(b)
, F7
(h) (h)
, F7
(h) (h)
DigiTech S-DISC™ SysEx
DigiTech S-DISC™ SysEx