Detune; Whammy - DigiTech BP200 User Manual

Detune

A detuner makes a copy of the original signal, takes the copied signal slightly out of
tune, and mixes the two signals back together. This gives the illusion that two guitars
are playing the same part together.
Amount - Rotate the GAIN knob to adjust the amount of detune (+/-24 cents).
Effect Level - Rotate the MASTER LEVEL knob to control the mix of the

Whammy™

Whammy is an effect that uses an Expression Pedal to bend the pitch of the incom-
ing signal, or add a bendable harmony with the original signal. As the pedal is moved,
the note is bent either up or down.
Amount - Rotate the GAIN knob to select the type of pitch bend.
Whammy (no Dry Signal)
1OCTUP (1 octave above)
2OCTUP (2 octaves above)
2NDDWN (a second below)
REV2ND (a second below reversed pedal
action)
4THDWN (a fourth below)
1OCTDN (an octave below)
2OCTDN (2 octaves below)
DIVBOM (Dive Bomb)
Effect Level - Rotate the MASTER LEVEL knob to adjust the volume of the
24
detuned note (0-99).
Whammy (0-99).
Harmony Bends (Dry Signal Added)
M3>MA3 (a minor third to a Major third)
2NDMA3 (a second above to a Major third
above)
3RD4TH (a third above to a fourth above)
4TH5TH (a fourth above to a fifth above)
5THOCT (a fifth above to an octave above)
HOCTUP (one octave above)
HOCTDN (one octave down)