Managing Lan And Wan Access To The Configuration Utility - Cisco WRV210 - Wireless-G VPN Router Administration Manual

Administration
Managing Access and Configuring Other Management Options
STEP 1
STEP 2
STEP 3
Cisco Small Business WRV210 Administration Guide
Click Administration > Management in the navigation tree.
In the Admin Password section, enter and confirm the new password.
• Admin Password: Enter the new password. The password can include any
alphanumeric characters.
• Re-enter to confirm: Re-enter the Router's new Password to confirm it.
Click Save to save your settings, or click Cancel to refresh the page with the
previously saved settings.

Managing LAN and WAN Access to the Configuration Utility

With the default settings, the Configuration Utility can be accessed only from a
computer that is physically connected to one of the Router's LAN ports. You can
adjust the LAN access to enable access through a wireless connection, and
enable WAN access from a computer at another site. For LAN and WAN access,
you also can specify other settings.
Managing Access and Configuring Other Management Options,
page 80Configure these settings in the Local Router Access section and the
Remote Router Access section of the Administration > Management page.
7
82