NETGEAR DGND3300 - RangeMax Dual Band Wireless-N DSL Gateway Wireless Router Setup Manual page 32

Leave the Wireless mode at the default setting of Up to 270 Mbps at 5GHz and 54 Mbps at
5.
2.4GHz. This mode is backward compatible with 802.11b and 802.11g wireless adapters.
6. Click Apply to save your changes.
If you are configuring the router from a wireless computer and you change the
router's SSID, channel, or security settings, you will lose your wireless
connection when you click Apply. You must then change the wireless settings of
your computer to match the router's new settings.
Configure and test your computers for wireless connectivity.
7.
Program the wireless adapter of your computers to have the same wireless network name
(SSID) as the modem router. Check that they have a wireless link and are able to obtain an IP
address by DHCP from the router.
Your modem router is now configured to provide Internet access for your network. Your modem
router automatically connects to the Internet when one of your computers requires access. It is not
necessary to run a dialer or login application such as Dial-Up Networking or Enternet to connect,
log in, or disconnect. These functions are performed automatically by the modem router as needed.
To access the Internet from any computer connected to your modem router, launch a browser such
as Microsoft Internet Explorer or Netscape Navigator. You should see the modem router's Internet
LED blink, indicating communication to the ISP. The browser should begin to display a Web page.
Configuring Your Wireless Network 28