NETGEAR DGND3300 - RangeMax Dual Band Wireless-N DSL Gateway Wireless Router User Manual page 85

RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
To configure LAN settings, log in to the modem router, and under the Advanced heading, select
LAN Setup. The following screen displays:
Figure 6-1
If you make changes you must click Apply in order for the changes to take effect.
Note: If you change the LAN IP address of the modem router while connected through
the browser, you will be disconnected. You must then open a new connection to the
new IP address and log in again.
The LAN Setup fields are explained in the following table.
Table 6-1. LAN Setup
Settings
Device Name
6-2
Description
A descriptive name for the modem router, which will be
shown in the Network on Windows Vista and the Network
Explorer on all Windows systems. The Device Name field
cannot be blank.
v1.0, September 2009
Customizing Your Network Settings