Troubleshooting - D-Link DBT-122 Manual

Troubleshooting

Cannot connect to a paired device
Paired devices are always displayed in My Bluetooth Places, even if the
remote device is out of range or not powered up.
Verify that the remote member of the pair is within radio range, and powered
up, and then attempt the connection again.
Cannot discover services on an unpaired
remote device
The remote device may not be powered up or may be out of range.
•
Verify that the remote device is powered up.
•
Verify that the remote device is in Connectable mode (Bluetooth
Configuration Panel > Accessibility tab).
•
Perform a Search for Devices to verify that the device is within range.
Dial-up Networking service does not start
The Dial-up Networking service will not start unless a properly configured
modem is attached to the server.
•
Verify that the modem is usable as a local device on the computer to
which it is attached.
•
•
•
•
In the Bluetooth Configuration Panel, Local Services tab,
double-click the Dial-up Networking service.
Click the down arrow in the Modem field and select the modem
that will be used to dial out.
Click the OK button.
Click the OK button to close the Bluetooth Configuration Panel.
58