Regulatory Compliance and Safety Information The Linksys One SVR200 Services Router meets the following regulatory compliance and safety standards Specification Description Products with the CE Marking indicate compliance with the 89/336/EEC and 73/23/EEC Regulatory Compliance directives, which include the safety and EMC standards listed below.
FCC REQUIREMENTS This equipment complies with Part 68 of FCC Rules. On the bass unit of this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. IF REQUESTED, THIS INFORMATION MUST BE GIVEN TO THE TELEPHONE COMPANY.
This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. Company: Cisco-Linksys LLC Address: 121 Theory Drive, Irvine, CA 92612, U.S.A. Tel no.: 949-823-3188...
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The Class [B] digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation. Cet appareil numerique de la class [B] respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. IMPORTANT NOTE Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &...
REN (Ringer Equivalent Numbers) Statement ''NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.'' Attachment Limitations Statement ''Notice: This equipment meets telecommunications network protective, operational and safety...
Page 17
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.''...
Environmental Specifications Dimensions 12.1” x 7.08” x 1.73” (308 mm x 180 mm x 44 mm) Unit Weight 3.03 lbs. (1.376kg) Power 48 VDC FCC/IC (USA/Canada) EMI: Part 15B/ICES-003 FCC (USA) Telecom, Part 68; Wireless, Part 15C IC (Canada) Telecom, CS-03; Wireless, RSS-210 UL/cUL (USA/Canada) Safety: UL 60950-1 Certification CE (Europe) EMI EN 55022, EN 55024, EN 60950-1...
Safety Information The following statements are warnings or safety guidelines. A warning means danger. You are in a situation that could cause bodily injury. Before working on equipment, be aware of the hazards involved with electrical circuitry and standard safety practices to prevent accidents. IMPORTANT SAFETY INSTRUCTIONS This warning means danger.
Page 20
Product Disposal Ultimate disposal of this product should be handled according to all national laws and regulations. Warning Inline power circuits provide current through the communication cable. Use the Linksys provided cable or a minimum 24 AWG communications cable. Caution...
Page 21
Power Safety Warnings TN Power The device is designed to work with TN power systems. Warning Ground Conductor Warning Never defeat the ground conductor or operate the equipment in the absence of a suitably installed Warning ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.
Page 22
Main Disconnecting Device The plug-socket combination must be accessible at all times, because it serves as the main Warning disconnecting device. Only use the Linksys-specified power supply. Refer to the installation manual provided with this product. Caution...
Page 23
Open Source Software. The GPL source code incorporated into the Software is available for free download at http://www.linksys.com/ gpl. If You would like a copy of the GPL source code in this Software on a CD, Linksys will mail to You a CD with such code for $9.99 plus the cost of shipping upon request.
Limited Warranty Linksys warrants to the original end user purchaser of the Linksys Product (“You”) that for a period of five (5) years for the Linksys Product’s Hardware and for a period of one (1) year for the Linksys Product’s fan and power supply (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use.