Motorola HMEZ2000 - Homesight Wireless Home Security Monitoring Quick Start Manual page 7

Wall Mount Drilling Templates
Mounting tools: Screwdriver, electric drill or awl. On hard surfaces, Motorola recommends that you pre-drill ½-inch
deep pilot holes with a drill bit slightly smaller than the camera mounting screws before securing the camera to the
surface. When mounting a camera on soft surfaces like sheetrock, use an awl to punch holes in the material slightly
smaller than the plastic anchors included in the hardware mounting kit.
The illustration is drawn to a one-to-one scale, which means that it provides the exact dimensions required to mount
the unit.
Wireless Motion Sensor Camera
(Day) drilling template
Wireless
Door/Window
sensor drilling
template
Drill holes in
these positions
Top
0.27 in
7
1.11 in
Drill holes in
these positions
Wireless
Door/Window contact
drilling template