Imgbox Modifiers; A - Output Image Width; B - Output Image Height; D - Pixel Depth - Honeywell 4800dr - Document Camera Imaging Manual

IMGBOX Modifiers

A - Output Image Width

This option is used to size the image horizontally. If using this option, set the resolution (R) to zero.
Example of Image Width set to 200A:

B - Output Image Height

This option is used to size the image vertically. If using this option, set the resolution (R) to zero.
Example of Image Height set to 50B:

D - Pixel Depth

This indicates the number of bits per pixel in the transmitted image, which defines whether it will be
grayscale or black and white.
8D 8 bits per pixel, grayscale image (default)
1D 1 bit per pixel, black and white image

F - File Format

This option indicates the type of file format in which to save the image.
0F KIM format
1F TIFF binary
2F TIFF binary group 4, compressed
3F TIFF grayscale
4F Uncompressed Binary
5F Uncompressed grayscale
JPEG image (default)
6F
7F Outlined image
8F BMP format

H - Height of Signature Capture Area

The height of the signature capture area must be measured in inches divided by .01. In the example,
the height of the area to be captured is 3/8 inch, resulting in a value of H = .375/0.01 = 37.5.
1 - 16
Example: IMGBOX245w37h55y.
Example of Image Width set to 600A:
Example of Image Height set to 100B: