Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Canon 450X - RE Document Camera
Summary of Contents for Canon 450X - RE Document Camera
- Page 1 English Canon Video Visualizer RE-450X INSTRUCTION MANUAL NTSC/PAL...
- Page 2 (servicing) instructions in the literature accompanying the appliance. • This Instruction Manual may not be copied, in whole or part, without prior consent of Canon. • The content of this manual is subject to change without notice. • Canon is not responsible for any damage, direct or indirect, arising from or related to this manual’s use.
-
Page 3: Fcc Notice
IMPORTANT USAGE INSTRUCTIONS WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. FCC NOTICE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS In these safety instructions the word “product” refers to the Canon Video Visualizer RE-450X and all its accessories. 1. Read Instructions—All the safety and operating product may fall, causing serious injury to a child or instructions should be read before the product is adult and serious damage to the product. - Page 5 Canon or lines or circuits as contact with them might be fatal. that have the same characteristics as the original part.
-
Page 6: Table Of Contents
CONTENTS IMPORTANT SAFETY INSTRUCTIONS NOMENCLATURE AND FUNCTIONS ASSEMBLING, STORING AND CONNECTION OPERATION Manual Focusing Film Projection Readjusting the White Balance Changing the angle to Letter/A4 size Freezing an output image Projecting white documents Adjusting Brightness and Picture Contrast SYSTEM CONNECTION Outputting to a video monitor To Control by a Computer Changing to Pictures via External Input Equipment... -
Page 7: Nomenclature And Functions
NOMENCLATURE AND FUNCTIONS Camera head Illumination lamp Lens cap Illumination lamp for reflection copies. Pressing the LIGHTS button on the operation panel turns the lamp on. The angle of the lamp is adjustable. Rear panel Document table and Backlight Arm lock release lever Press to fold/unfold Operation panel... - Page 8 Operation Panel LIGHTS button/indicator DETAIL control Use this button to turn ON the Use this control to adjust picture quality (see page 14) illumination lamps for reflection Turn the control to the HARD side to emphasize the copies. The indicator flashes outline, turn to the SOFT side for softer outline.
-
Page 9: Assembling, Storing And Connection
ASSEMBLING, STORING AND CONNECTION Assembling Unfold and raise the pair of illumination lamps. Raise the right-hand illumination lamp first ( ), then the left- hand illumination lamp ( ). Press the arm lock release lever, and raise the Arm lock release lever arm until it stops. - Page 10 Storing Put the lens cap to the lens. Be sure to turn the power OFF before storing the unit. NOTICE Direct the camera head sideways until it stops. Hold the arm with your right hand and press Arm lock release lever the arm lock release lever, then pull the arm down to the document table very carefully.
- Page 11 Connection To connect the RE-450X to a liquid-crystal projector, use the RGB cable included in the package. Use the power cable included in the package. To RGB input terminal RGB cable Liquid-crystal projector To RGB OUT Rear panel VIDEO S VIDEO RS-232C RGB IN RGB OUT...
-
Page 12: Operation
OPERATION Turn the power ON. P O W E R When the power of the RE-450X is turned ON, the POWER indicator on the operation panel lights up. • When the power is turned on, it takes about 20 seconds to show an image. -
Page 13: Manual Focusing
Manual Focusing When trying to focus correctly or focusing on a particular point of three-dimensional objects, you can achieve focusing by pressing the manual focusing buttons. The manual focusing is valid up to approx. 65mm above the document table. When focusing the lens Operation panel manually, press the FOCUS button first and then the... -
Page 14: Readjusting The White Balance
Readjusting the White Balance Readjust the white balance manually when the color tone seems unnatural or if you want to change it to your desired tone. To readjust the white balance, complete the following steps: Operation panel Press the WHITE BALANCE button (to turn on manual mode). Turn the WHITE BALANCE knob to adjust to the desired color BACK POWER... -
Page 15: Projecting White Documents
Projecting white documents To project white parts of white documents much whiter, press the WHITE PAPER button. If the button is pressed, the WHITE PAPER indicator lights up. If the button is pressed again, the indicator turns off and returns to regular mode. To project white documents much whiter, press the WHITE PAPER Operation panel button. -
Page 16: System Connection
SYSTEM CONNECTION The following equipment can be connected to the input and output terminals. Use the included power cord. For cables other than the power cord and the RGB cable, use commercially available cables. For details of operation, refer to the instruction manual of the equipment to be used. Output Equipment Outputting to a video Liquid-crystal... -
Page 17: Changing To Pictures Via External Input Equipment
Changing to Pictures via External Input Equipment If you connect a computer or other equipment to the RGB input terminal, you can project images from that equipment simply by pressing a button. Camera of the RE-450X Liquid-crystal projector RGB OUT RGB IN External INPUT SELECT button... -
Page 18: Recording By Vcr
Recording by VCR If you want to record using a VCR, connect the RE-450X to the VCR using a commercially available video cable. For details of operation, refer to the instruction manual for the equipment to be used. To VIDEO IN terminal Video cable Rear panel... -
Page 19: Functions Controlled By A Computer
Functions Controlled by a Computer The following functions can be controlled by a computer. For more information, please contact your dealer. Category Abbreviation Meaning Zoom lens control Zoom STOP The zoom lens stops. Zoom TELE Moves the zoom lens toward telephoto. Zoom WIDE Moves the zoom lens toward wide-angle. -
Page 20: Troubleshooting
TROUBLESHOOTING If the RE-450X does not function properly, check the following points before contacting your dealer. Reference Problem Possible cause page No image appears on • The lens cap has not been removed. the monitor • The power of the RE-450X or other equipment has not been turned ON. -
Page 21: Specifications
Relative humidity: 20% – 85% (no condensation) • Weight and dimensions are approximate. • Errors and omissions excepted. • Specifications and design of the product are subject to change without notice. • Canon is a registered trademark of Canon Inc.