Controlling Your Tv With The Supplied Remote - Sony DVP-NS67PB Operating Instructions Manual

Controlling Your TV with
the Supplied Remote
You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
TV
Number
buttons
You can control your TV using the buttons
below.
By pressing
TV [/1
2/VOL +/–
t/TV/VIDEO
Note
Depending on the connected unit, you may not be
able to control your TV using all or some of the
buttons on the supplied remote.
58
2/VOL +/–
t/TV/VIDEO
You can
Turn the TV on or off
Adjust the volume of the TV
Switch the TV's input source
between the TV and other
input sources
Controlling other TVs with the
remote
You can control the sound level, input source,
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer's code.
1
While holding down TV [/1, press the
number buttons to select your TV's
manufacturer's code (see the table
below).
2
Release TV [/1.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
◆For RMT-D175P remote commander only
Manufacturer Code number
Sony 01 (default)
Aiwa 01 (default)
Grundig 11
Hitachi 24
JVC 33
LG 06
Loewe 06
Panasonic 17, 49
Philips 06, 08
Samsung 06, 71
Sanyo 25
Sharp 29
Thomson 43
Toshiba 38