Page 1
B2B Solutions Business Group Sony Corporation NOTE: This manual is for Sony authorized System Integrators. This manual describes about the KIOSK mode, new feature of the PCS-TL33 and PCS-TL30 Ver2.0 and later versions. KIOSK mode target application examples: Remote consultation in banking stores, and financial stores...
TL33 KIOSK Mode Manual_E_071023.pdf Section 1. How to setup the KIOSK mode Please change setup configuration from the WEB interface to setup KIOSK mode. (GUI setup menu is not available because this feature is opened only for administrator) 1. Select KIOSK mode in the Setup > General > Launcher mode. a) Administrator can select Normal mode to restore setup.
TL33 KIOSK Mode Manual_E_071023.pdf Section 2. How to restore setup without using WEB interface <IMPORTANT> In emergency situation, please press MIC button ( ) on the front panel for more than ten seconds. This will force the system from the KIOSK mode to the Normal mode, and it will also force the background image to the Default.
IMAGE/WPCUSTOM.JPG Custom background image Note: As long as a WPCUSTOM.JPG file in IMAGE directory, the PCS-TL33/TL30 will show the custom background image in any modes (Normal/KIOSK/Skeleton). 2. To restore the default background Connect to the PCS-TL33/TL30 by TELNET Then delete “WPCUSTOM.JPG” file to show one of pre-installed background...
The recommended file size is under 300K Bytes. Section 6. Custom message API in the Skeleton mode Please use the command by TELNET. 1. Connect TELNET to the PCS-TL33/TL30, and input “cntr” to start external control mode. 2. Input “smes /desired character strings to display/POSITION/DURATION/”...