Yamaha DME Designer Owner's Manual page 110

Chapter 3 Main Panel Window
2
3
4
110 DME Designer Owner's Manual
Select an update program with the extension ".DCB" (for DME) or ".CCB" (for ICP1) and
click the [Open] button.
The "Firmware Update" dialog box will be displayed. The DMEs or ICPs in the current zone will
be displayed in a list. The component names and versions will be displayed hierarchically for
each DME.
Check the component you wish to update.
You can click on the checkmark to turn it ON/OFF. The [Select All] button places a checkmark
next to all the DMEs. The [Clear All] button turns OFF all the DME checkmarks.
Check the component you wish to update, then click the [Update] button.
The component update will begin.
NOTE
While updating, be very careful not to disconnect the USB or Ethernet cable or turn off the power to the DME.
The DME Designer MIDI setting information will be lost.
When the DME update is finished, the DME unit will be automatically restarted. You also need to
restart DME Designer.