Table of Contents
Advertisement
A WLAN connection is established when you create a data connection using a WLAN
internet access point. The active WLAN connection ends when you end the data
connection.
You can use WLAN during a voice call or when packet data is active. You can only be
connected to one WLAN access point device at a time, but several applications can
use the same internet access point.
When the device is in the offline profile, you can still use WLAN (if available).
Remember to comply with any applicable safety requirements when establishing
and using a WLAN connection.
Tip: To check the unique media access control (MAC) address that identifies
your device, open the dialler and enter *#62209526#.
WLAN wizard
Select
Menu
Settings
>
The WLAN wizard helps you to connect to a wireless LAN (WLAN) and manage your
WLAN connections.
If the search finds WLANs, to create an internet access point (IAP) for a connection
and start the web browser using this IAP, select the connection and
browsing.
If you select a secured WLAN, you are asked to enter the relevant password. To
connect to a hidden network, you must enter the correct network name (service set
identifier, SSID).
If you already have the web browser running using the currently active WLAN
connection, to return to the web browser, select
the active connection, select the connection and
WLAN internet access points
Select
Menu
Settings
>
Select from the following:
© 2009 Nokia. All rights reserved.
and
Connectivity
and
Connectivity
Wireless
LAN.
>
Continue web
Disconnect
WLAN.
Wireless LAN
>
Connectivity
Start web
browsing. To end
> Options.
105
Advertisement
Table of Contents
