Canon PowerShot A3000 IS User Manual page 117

Changing the Start-up Screen
●
You can change the start-up image that appears on the screen when you
turn on the camera.
Registering the Start-up Screen
●
When you press the 1 button and set the camera to Playback mode, you
can register sounds and images.
Any previously registered start-up image will be overwritten when
registering a new start-up image.
Register images or sounds with the included software
You can register images or sounds to the camera using the included
software. Refer to the Software Guide for details.
Choose [Start-up Image], then press the m
●
button.
Press the qr buttons to choose an option.
●
No start-up image.
1 Preset images. (cannot be modifed)
Preset images.
You can set recorded images, and use the
2
included software to change the images
(p. 117).
Choose [Start-up Image], then press the m
●
button.
Press the qr buttons to choose [2], then
●
press the m button.
Press the qr buttons to choose an image,
●
then press the m button.
Press the qr buttons to choose [OK], then
●
press the m button to complete
registration.
Changing Camera Settings
117