Table of Contents
Advertisement
Operating your ikon™ Induction Cooker
TIMER MODE
1.
Power level and/or Adjustable temperature
mode must be selected prior to setting the
Timer mode.
2.
To select the Timer mode, press the mode
button once, a corresponding indicator light
will illuminate on the LED screen adjacent to
the timer mode
icon. A beep will sound.
3.
Select the desired Time using the Control
dial. Turn dial clockwise to increase time and
anti-clockwise to decrease time. The time is
adjustable on a scale from 1 minute to 180
minutes. A beep will sound each time the
timing is changed.
4.
During the selection period, the LED screen
will continue to flash, when the desired time
has been selected, the LED screen will cease
flashing after approximately 5 seconds and
display selected.
Turning the control dial slowly increases or
decreases the timing by 1 minute increments,
allowing for accurate selection. A beep will
sound each time the time is changed. Turning
the control dial very quickly clockwise increases
timing by 10 minute increments, anticlockwise
decreases increments by 10 minute increments
fast motion selection.
10
5.
Timer count down then commences and
when the selected time has lapsed, a beep
will sound 5 times and the Induction Cooker
will automatically switch to stand-by mode.
The Timer mode does not need to be set to use
the Power level mode or Adjustable temperature
mode.
To readjust power level and temperature
during cooking with timer mode, switch off the
appliance, switch back on and reset.
IF THE BREVILLE IKON™ INDUCTION
COOKER DETECTS THE TEMPERATURE
ON THE GLASS CERAMIC PLATE
SURFACE ExCEEDING 100°C DURING
COOKING, THE HEATING PROCESS WILL
CEASE AND THE STAND-BY MODE WILL
ACTIVATE FOR 60 SECONDS TO REDUCE
THE TEMPERATURE. AT THE SAME
TIME, THE LED SCREEN WILL DISPLAY
THE ERROR MESSAGE E6. THIS ERROR
MESSAGE WILL TURN OFF WHEN THE
TEMPERATURE FALLS BELOW 100°C.
continued
Hide quick links:
Advertisement
Table of Contents
