4
Press ENTER.
•
Playback starts.
•
When you change the title, playback starts from Chapter 1
of the selected title.
•
Some discs may not work in the above operation.
Repeat playback
Title, Chapter Playback:
1
Press PLAY MODE during playback or stop mode.
2
Press ENTER repeatedly to select "Chapter" or "Title".
The unit automatically starts repeat playback after finishing
the current title or chapter.
•
If you set the repeat mode during stop mode, press PLAY to
start Repeat playback.
Play Mode
Repeat
: Off
3
Press PLAY MODE again to make the screen disappear.
•
In stop mode, press PLAY to start Repeat playback.
•
To resume normal playback, select Repeat "Off" in step 2.
A-B Repeat Playback:
A-B repeat playback allows you to repeat material between two
selected points.
1
Press REPEAT A-B during playback.
The start point is selected.
A
2
Press REPEAT A-B again.
The end point is selected. Playback starts at the point that you
selected. Playback stops at the end point, returns to Point A
automatically, then starts again.
A B
3
To resume normal playback press REPEAT A-B again.
Off
"
" appears on the screen.
NOTE:
•
Some discs may not work with the repeat operation.
•
In A-B repeat mode, subtitles near point A or B may not appear.
•
During the A-B Repeat Playback the ANGLE feature will not
operate.
•
You may not be able to set A-B Repeat, depending on the
scenes of the DVD.
•
A-B Repeat does not work with an interactive DVD, MP3/WMA/
JPEG-CD.
Marking desired scenes
The TV/DVD stores the points that you want to watch again.
You can resume playback from that scene.
Marking the scenes:
1
Press MARKER during playback.
2
Select the blank Marker using ▲ or ▼, then press ENTER at
the desired scene.
Marker 1
00 27 54
Marker 2
Marker 3
•
Up to 3 scenes can be selected.
•
Repeat this procedure to set the other 2 scenes.
3
Press MARKER to remove this display.
Returning to the scenes:
1
Press MARKER during playback or stop mode.
2
Press ▲ or ▼ to select the Marker 1-3.
Marker 1
00 27 54
Marker 2
01 16 25
Marker 3
02 08 31
3
Press ENTER.
Playback starts from the marked scene.
To cancel the mark:
1
Press MARKER during playback or stop mode.
2
Press ▲ or ▼ to select the Marker 1-3.
3
Press CANCEL.
Press MARKER to remove this display.
NOTE:
•
The marking is canceled when you eject the disc or turn the
power off.
•
Some subtitles recorded around the marker may fail to appear.
[DVD]
Changing soundtrack language
You can select the language when you play a multilingual disc.
1
Press AUDIO during playback.
The current soundtrack language will appear.
1/2 Eng Dolby Digital
2
Press AUDIO repeatedly until the desired language is
selected.
The on-screen display will disappear after a few seconds.
NOTE:
•
If the desired language is not heard after pressing AUDIO
several times, the language is not recorded on the disc.
•
Changing soundtrack language is canceled when you eject the
disc.
The initial default language or available language will be heard if
the disc is played back again.
27