Removal and Replacement Procedures— Microtower (MT) Chassis
6.10 Speaker
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Disconnect the speaker cable from the system board.
5. Remove the two screws that secure the speaker to the inside of the chassis 1 then, remove
the speaker 2.
To install the speaker, reverse the removal procedure.
6–16
(Section 6.1, "Preparation for
(Section 6.2, "Access
Panel").
(Section 6.3, "Front
Bezel").
404569-001
Disassembly").
Service Reference Guide, dx2100 MT