Computer Setup-Power - HP 510B - Minitower PC Maintenance And Service Manual

Table A-7 Computer Setup—Advanced (continued)
Primary Video Adapter Allows you to select the boot display device when more than 2 video options are offered by the
Onboard LAN
Onboard LAN Boot
ROM
Onboard Audio
Supervisor Password
User Password
USB Ports
Change Supervisor
Password
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table A-8 Computer Setup—Power
Option
After AC Power
Failure
NX (No Execute)
Virtualization
Technology
system:
● PCI
● PCI-E x1
●
PCI-E x16
●
Onboard
Allows you to disable/enable onboard LAN controller.
Allows you to disable/enable the boot ROM of the onboard LAN chip.
Allows you to set the onboard audio to:
●
Auto
●
Disabled
●
Enabled
Shows whether the supervisor password is enabled or disabled (view only).
Allows you to change the user password.
Lists USB ports 1-10, what is connected to the port, and allows you to enable/disable each port.
Allows you to change supervisor password.
Description
Allows you to select system restart behavior after power loss:
● Auto
●
Power On
●
Stay Off
Disables/enables NX bit.
Allows you to enable/disable Virtualization Technology (VT). VT enables a CPU feature to run
multiple simultaneous virtual machines allowing specialized software to run in full isolation of each
other.
Model 505B/515B — Computer Setup (F10) Utilities
61