Cooktop Burners - GE JGP963 - Profile 36" Deep Recessed Gas Cooktop Installation Instructions Manual

COOKTOP BURNERS

ASSEMBLING THE COOKTOP
1
BURNERS
The electrode of the spark igniter is exposed.
Be careful not to push any cooktop controls
while the top of the burner is removed.
Do not remove the top or touch the electrode
of any burner while another burner is turned
on. Electrical shock might result.
FOR PORCELAIN COOKTOPS
Place the burner head on the burner
A
base so that the pins match up with the
slots on the base.
Position the burner cap on the burner
B
head.
C Place the burner grate over the burner
assembly on the porcelain units. The
bottoms of the burner grates have feet
that fit into corresponding indentations
in the cooktop.
Burner Grate
Burner Base
Burner Box
Bottom
Installation Instructions
Burner Cap
Burner Head
Spark Igniter
10
FOR GLASS CERAMIC COOKTOPS
A Place the burner head on the burner
base, so that the pins match up with the
slots on the base.
B Position the burner cap on the burner
head.
Place the burner grate over the burner
C
assembly on the ceramic units. The grate
fits over the raised area on the burner
head.
Burner Grate
Burner Cap
Burner
Head
Burner Base
Spark Igniter
Glass
Maintop