Before Using The Appliance; Safeguarding The Environment - Whirlpool ARG 912 Instructions For Use Manual

Hide thumbs Also See for ARG 912:
Table of Contents

Advertisement

BEFORE USING THE APPLIANCE

• Your new appliance is designed exclusively for
domestic use.
To ensure best use of your appliance, carefully
read the operating instructions which contain
a description of the product and useful
advice. Keep these instructions for future
reference.
• After unpacking the appliance, make sure it is
not damaged and that the drawers close
properly. Any damage must be reported to the
dealer within 24 hours of delivery of the
appliance.

SAFEGUARDING THE ENVIRONMENT

1. Packing
The packing material is 100%
recyclable and bears the recycling symbol
For disposal, comply with the local regulations.
Keep the packing materials (plastic bags,
polystyrene parts, etc.) out of the reach of
children, as they are a potential source of danger.
2. Scrapping/Disposal
The appliance is manufactured using recyclable
material.
This appliance is marked in compliance with
European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE). By
ensuring the correct disposal of this appliance, you
can help prevent potentially negative consequences
for the environment and the health of persons.
The symbol
on the appliance, or on the
accompanying documents, indicates that this
appliance should not be treated as domestic waste
but must be taken to a special collection centre for
the recycling of electrical and electronic
equipment.
When scrapping the appliance, make it unusable by
cutting off the power cable and removing the
doors and shelves so that children cannot easily
climb inside and become trapped.
Scrap the appliance in compliance with local
regulations on waste disposal, taking it to a special
collection centre; do not leave the appliance
unattended even for a few days, since it is a
potential source of danger for children. For further
information on the treatment, recovery and
recycling of this product, contact your competent
• Wait at least two hours before switching the
appliance on, to ensure that the refrigerant
circuit is fully efficient.
• Installation and the electrical connection must
be carried out by a qualified technician
according to the manufacturer's instructions
and in compliance with the local safety
regulations.
• Clean the inside of the appliance before using it.
local office, the household waste collection service
or the shop where you purchased the appliance.
.
Information:
This appliance does not use CFC. The refrigerant
system contains either R134a (HFC) or R600 (HC).
Refer to the rating plate inside the appliance.
Appliances with Isobutane (R600a): isobutane is a
natural gas without environmental impact, but is
flammable. Therefore, make sure the refrigerant
circuit pipes are not damaged.
Declaration of conformity
This appliance has been designed for preserving
food and is manufactured in compliance with
Regulation (CE) No. 1935/2004.
This appliance has been designed, manufactured
and marketed in compliance with:
• the safety objectives of Low Voltage Directive
2006/95/EC (replacing 73/23/EEC and
subsequent amendments);
• the protection requirements of Directive
"EMC" 89/336/EEC
amended by Directive 93/68/EEC.
Electrical safety of the appliance can only be
guaranteed if it is correctly connected to an
approved earthing system.
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

912

Table of Contents