External Mouse; Display; Pc Cards - NEC VERSA TXI Manual

External Mouse

Display

PC Cards

C-2 Frequently Asked Questions
How can a mouse and an external keyboard be connected to the notebook
at the same time?
The NEC Versa TXi is equipped with three USB ports that allow you to
connect any combination of three USB devices, at the same time. If you
purchase a USB mouse and a USB keyboard, simply plug each device into
any of the USB ports on your system.
What is the maximum resolution I can run in simultaneous mode?
The maximum resolution in simultaneous mode is 1024x768 for XGA TFT or
800x600 for SVGA TFT panels, depending on the capabilities of the external
monitor. You can obtain higher resolutions if you connect a higher-resolution
external monitor and switch to CRT-only mode.
How can I change my video drivers?
Go to Start, Settings, Control Panel, and double click the Display icon. Click
the Settings tab, click Advanced Properties, and click Change. Click Show all
devices from the Select Device screen. Find the video driver you need, or
insert a diskette or CD into the appropriate drive. Click on Have Disk and
follow the on-screen instructions to install a new video driver.
In which slots do my PC Cards go?
Your PC Cards can go into either slot if they are NEC-approved cards. Other
software may not support the use of both slots. Type III cards only fit in the
bottom slot (slot 0).
Is there any instance when a modem or network card is only supported in
one slot?
This could be true in cases where the PC Card firmware is being upgraded.
Read the release notes that accompany the upgrade.