NEC VERSA MINIDOCK 6000 Manual page 49

Turn the MiniDock over and locate the battery bay on the bottom of the
3.
unit.
Remove the screw that secures the battery bay cover. Insert a tip of a
4.
flat-head screwdriver into the notch and lift the cover off the unit.
Remove the battery as follows:
5.
T
Lift the battery out of the MiniDock. It is attached to two cables,
which are connected to the MiniDock via a connector.
T
Gently pull the cable connector into the battery bay until it is discon-
nected from the MiniDock.
Removing the battery bay cover
Removing the battery
Solving Problems 5-3